6000842
Parting Inserts for the GTN System.Grade Name: IC20Insert Material: CARBIDE - UNCOATEDISO Range: K10-20 N05-25 S05-20 H05-15ANSI Range: C2-C3Grade Description: 'An uncoated carbide grade. Used for semi-finishing, finishing and semi-roughing of aluminum, cast iron and stainless steel. Used at low to medium speeds and feeds.'Grade Name: IC54Insert Material: CARBIDE - UNCOATEDISO Range: P40ANSI Range: C5Grade Description: 'Suitable for milling, turning and planing at cutting speeds with large feeds; for machining in unfavorable conditions; permits use of sharp positive angles. Workpiece materials: steel, steel castings with cavities, austenitic stainless steel, stainless steel castings.'Grade Name: IC328Insert Material: CARBIDE - PVD COATEDISO Range: P25-50 M30-40 S25-30ANSI Range: C5-C6 C2-C3Coating Description: TiN/TiCNGrade Description: 'A TiN/TiCN PVD coated tough grade. Used for milling, grooving, parting and drilling a wide range of workpiece materials, at low to medium cutting speeds.'Grade : IC354A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.ISO Range - P/M/K: (P20-P40)(M10-M30)Grade or Coating Type: PVDCoating Layers: TiCNGrade : IC50MRecommended for milling of steel, for semifinishing, semiroughing and roughing with medium or largechip sections and machining in unfavorable conditions.ISO Range - P/M/K: (P20-P30)(M25-M40) Grade or Coating Type: UN-COATED Coating Layers: Uncoated
