9080-STD
A simple to use vibration monitoring and analysis tool that helps to diagnose faults such as unbalance, misalignment and looseness. Overall vibration values are displayed with colour coded alarm levels for ISO values and bearing condition. Colour coded frequency band alarms based on run speed can be displayed to diagnose machine faults such as balance, misalignment and looseness. VibTrend software enables PC based trending of machine condition over time and generation of reports The fully dynamic cursor displays frequency and amplitude values. Readings are easily saved and recalled, and all alarm levels and settings are stored in non-volatile flash memory. Run speed and machine type are entered with the simple to use setup wizard. BNC connector for external accelerometer.Size: 200 x 60mm x 26mm.Weight: 280g (not including magnet).Environmental: water, sand and dust: IP67 waterproof, operating: 0C to 50C, storage: -20C to 70C. Power supply: 2x AA batteries.Max. frequency resolution: 1.25 Hz @ 800 lines FFT setting.Displayed vibration amplitude units: acceleration in g velocity in mm/s (or inches/s), bearing noise in BDU (bearing damage units).Displayed frequency units: Hertz (Hz), RPM or CPM.Input auto range: +/- 50g or +/- 5gDynamic range: 96dB (0.002g resolution)VA diagnostic bands (RPM = run speed): unbalance 1x RPM, misalignment 2x RPM, looseness 3x RPM.Accessories: standard 100mV/g BNC, accelerometer, nylon carrying case.Options: Tacho strobe/flashlight attachment, bluetooth headphones/ear defenders.
