category :
Electronics
Audio
Audio Components
Signal Processors
Noise Gates & Compressors
850031640634, WA76-D2
The WA76-D2 is a two-channel FET compressor. It is a reincarnation of one of the most underused compressors of all time – the 1176 type FET compressor. The letter D denotes one of the last revisions “Rev D”, which was characterized by extremely low noise and distortion and a rich, full analog sound – all thanks to premium components and input and output transformers. The control parameters are standard from a user perspective.Two-channel FET compressor type 1176Reincarnation of the low-noise “D” revisionCompressor type In / OutFour compression ratiosAll Buttons functionDry/Wet for parallel compressionHigh-Pass filter in Side ChainThree channel linking modesCustom CineMag transformersVintage VU metersThe best-equipped compressor on the marketWA76-D2 – the standard features of the ’76 compressor have been supplemented with modern controls that significantly expand the compressor’s already legendary versatility and utility.The Mix potentiometer provides parallel compression for precise adjustment of the ratio of the dynamically processed WET signal to the unprocessed signal from the DRY input.Two bypass versions allow the compressor to be used only as a transformer saturator, a full compressor, or completely bypassed.Selectable input impedance allows working with the outputs of modern recording interfaces and direct connection of a high-impedance instrument - guitar, bass, mandolin, violin, ....SC HPF is a high-pass filter that you can insert into the path of the control signal, thus cutting off its lowest frequencies. This is especially suitable for processing bass instruments such as bass drums, bass, tuba, room drums and others. This will get rid of the unpleasant "breathing" and the sound will be much more dynamic. You can set the Side Chain filter frequency in the range of 30-300 Hz.Stereo - The WA76-D2 has several stereo modes that change the connection of both channels with the Stereo switch:Stereo - stereo compressorA|B - two independent dual mono unitsA>AB - two connected units, where only channel A is the driverActive/True bypassAllows you to take advantage of all the compressor and wiring options that were not possible with the original or any of its copies.Active bypass only disables the compressor, but the signal still passes through the transformers. This allows you to achieve a pleasant analog saturation of the signal.True Bypass bypasses the entire device, completely removing it from the signal chain.All of these added features make the WA76-D2 the clear choice for modern and vintage recording and post-production workflows.Premium components and precisionThe WA76-D2's "Rev D" circuitry uses premium ceramic and electrolytic capacitors, metal film resistors, and a redesigned preamp stage that improves the linear response of the FETs. These key components complement the unrivaled circuitry to deliver an authentic sound - a "cleaner, lower noise" 76-style compression experience.Custom CineMag TransformersThe WA76-D2 utilizes large core transformers that were custom-developed by CineMag USA to match the originals in vintage 76 compressors revisions A through D. They use the exact same specification data and materials that Reichenbach Engineering used in the original transformers. This results in an accurate vintage character with rich analog color.Carefully hand-tested in Austin, TexasLike all Warm Audio equipment, the WA76-D2 is meticulously hand-tested and inspected by trained technicians with a passion for music creation right at the brand's Austin, Texas facility.Features:100% Analog Discrete FET CompressorDual Channel VersionFaithful Reconstruction of Vintage “Rev D” FETPremium Transformers 0-12 (input) and 5002 (output) from CineMag USACompressor with Standard and Added FeaturesAttack = 20–800 μsRelease: 50 ms – 1.1 secondsRatio (Compression Ratios): 4:1, 8:1, 12:1 and 16:1“AII Buttons” for Extreme Hard LimitingVU Meter Options: Gain Reduction, +8 dB Output, +4 dB Output“Off” Button Turns Unit Off (True Bypass)Wet/Dry Control for Parallel CompressionVariable Filter for Side Chain: Type: High-Pass, Slope: 12 dB/Octave, Frequency: 30–300 Hz100% Discrete Audio Signal pathSelectable input impedance: 600 Ohm – for instruments, 10 kOhm – for both instruments and instrumentsClass A line level amplifierActive Bypass / True BypassFrequency range: 20 Hz - 20 kHz (± 1 dB)Balanced inputs and outputs: on XLR and TRS 6.3 mm (large jack)Total amplifier gain: 53 dB...Controls: Input;Attack;Ratio;Link;Output;Ext Sc;Meter;HPF;Mix;Bypass;Z;ReleaseElectronics: Solid StateRack Unit: 2UТype: Compressor, LimiterMIDI Interface: NoPhantom Power: NoNumber of Preamps: 2Width (cm): 48.3Signal to Noise Ratio: 86 dBHeadphone Output: NoneTrue Bypass: YesAnalogue Outputs: YesRackmountable: YesNumber of Channels: 2Number of Outputs: 4Frequency Range: 20 Hz - 20 kHzHeight (cm): 9.0Variant: DualAnalogue Inputs: 4Line Inputs: 4Line Output: 4Depth (cm): 15.9Power Supply: 100V - 240VWeight: 4,8 kg
